Nueva llegada Máquina de grabado y corte láser CO2 1325 económica para madera plástico cuero acrílico

FP1325PL CO2  máquina de grabado láser machine

1. Estructura soldada de bastidor de acero pesado de alta resistencia, tras tratamiento de envejecimiento y recocido a alta temperatura. El marco de soldadura de precisión junto con el marco pesado aseguran la alta resistencia y alta fiabilidad de la cama.

2. El plano guía del bastidor pasa por el fresado de cepillado CNC por la máquina de corte por láser de fibra estándar para garantizar la nivelación y el paralelismo de la máquina herramienta.

3. 3. Excelentes componentes de transmisión, eje Y de doble motor de accionamiento, garantizar el rendimiento de mecanizado de alta velocidad de la máquina.

4. Soporte de espejo óptico, trayectoria óptica más estable.

5. Toda la máquina está equipada con protector de sobrecarga de fuga.

6. Excelentes componentes de transmisión, eje Y con accionamiento de doble motor aseguran el rendimiento de mecanizado de alta velocidad de la máquina.

7. Soporte de espejo óptico, trayectoria óptica más estable.

8. La búsqueda de bordes completos para un error cuadrático de 1CM es pequeña.

9. Patente exclusiva: doble soplado y función antifuego.

10. Está equipado con dos conjuntos de sistema de succión: sistema de función de doble ventilador hacia abajo y sistema auxiliar de succión superior, mejor efecto de extracción de humo.

11. El ventilador y la bomba de aire se encienden y apagan automáticamente para ahorrar electricidad y ser menos ruidosos.

 

Introducing our state-of-the-art UV Laser Engraver, engineered for ultra-fine detailing, high contrast marks and minimal thermal impact. As part of our comprehensive suite of precision systems under Máquinas de marcado por láserEste modelo UV permite ir más allá del grabado estándar y adentrarse en nuevos territorios de materiales.

1. The Challenge: Why One Machine Needs Two Technologies

Laser types react differently to materials based on their longitud de onda:

• CO2 Lasers (10.6 nm): Absorbed perfectly by organic materials (Wood, Acrylic, Leather). Metals reflect this wavelength unless the power is extremely high (150W+ with Oxygen assist).

• Fiber Lasers (1.06 nm): Absorbed perfectly by metals (Steel, Aluminum, Brass). They pass straight through clear acrylic and cannot cut wood (they would just char/burn it).

2. The Solution: Hybrid CO2 & Fiber Laser Systems

For a business that needs to handle all three materials, there are two primary machine configurations:

Option A: The CO2 Hybrid (Oxygen-Assist)

This is a high-power CO2 machine (usually 150W or 300W) equipped with an Oxygen-Assist Gas Kit and a specialized laser head.

• Acrylic/Wood: Operates as a standard CO2 laser with air-assist for clean, polished edges.

• Metal: Switches to Oxygen-assist to "burn" through thin sheets of stainless steel or carbon steel (typically up to 1.5mm - 2mm).

• Best For: Signage companies that primarily do acrylic but occasionally need thin metal lettering.

Option B: The Dual-Head System (Independent Sources)

A single CNC frame equipped with two separate laser heads and two separate tubes (one CO2 tube and one Fiber source).

• Versatilidad: You get the engraving quality of a CO2 laser for wood and the high-speed cutting precision of a Fiber laser for metal.

• Best For: Industrial workshops that require high-quality results across all materials without compromising speed.

3. Technical Specification Matrix

Característica	CO2 Laser (Acrylic/Wood)	Fiber Laser (Metal)	Hybrid CO2 (All-in-One)
Material Specialty	Acrylic, Wood, MDF, Leather	Steel, Alum, Brass, Copper	Wood, Acrylic, Thin Steel
Engraving Quality	Excellent (Deep/Photo)	Excellent (Permanent Mark)	Good (Non-metals only)
Max Cutting (Metal)	N/A	10mm+ (depending on power)	1.5mm - 2.0mm (Oxygen)
Sistema de refrigeración	Industrial Water Chiller	Air or Water Chiller	Heavy-duty Water Chiller
Typical Bed Size	1390 / 1610 / 1325	1325 / 1530	1390 / 1325

4. Key Industry Applications

■ Multi-Material Signage

Combining Acrylic (for backlit letters) with Acero inoxidable (for the frame) and Madera (for the mounting backing). A hybrid machine allows you to produce all components on one bed.

■ Industrial Marking & Tagging

Engraving wooden serial plates for machinery and then switching to cutting the 1mm stainless steel nameplates for high-heat environments.

■ Architectural Models

Using wood for the terrain, acrylic for the "glass" windows, and thin metal for structural supports or decorative facades.

5. Professional Buyer’s Checklist

If you are sourcing this machine for a B2B project, ensure these three components are included:

1. Follow-Up System (Live Focus): Essential for metal cutting. The laser head must have a sensor that keeps a constant distance from the metal sheet, even if the metal is slightly warped.

2. Dual Gas Paths: You need separate inputs for Air (for wood/acrylic) and Oxygen/Nitrogen (for metal).

3. Certification: Ensure the machine carries CE and FDA certification. For high-power metal cutting, a fully enclosed cabinet (Class 1 Laser Safety) is highly recommended for operator protection.